T6 Aircraft Aluminum High Quality

Haomei supply high quality T6 aircraft aluminum with alloy 2024, 6061 and 7075 aluminium. 7075 aluminum alloy is used for high-strength structural forging aircraft. The 7075-T6 material has good comprehensive properties, that is, high strength, resistance to spalling corrosion and stress corrosion cracking, fracture toughness, and fatigue strength. T6 temper of aircraft grad aluminum stand for hardening treatment abbreviation, has good formability, weldability, machinability and, at the same time, has medium strength, and can still maintain good operability after annealing. T6 state of artificial aging after solution heat treatment is suitable for products that are no longer cold worked after solution heat treatment (straightening and leveling can be carried out, but the mechanical performance limit is not affected).

Strict process control during extrusion of T6 aircraft aluminum is the key to obtain good mechanical properties. In the production process, due to the limitation of actual conditions, it is often difficult to control the process, and some aircraft grade aluminum sheet manufacturers often do not realize the importance of craftsmanship is that the temperature, speed, etc. are not strictly controlled, which causes the mechanical properties of the product to be unqualified after aging. In the actual production process, the process parameters should be flexibly adjusted according to the cross-section of aircraft the aluminum. For example, for thicker aircraft profiles, the rod temperature should be appropriately increased, the extrusion speed should be slowed, and the cooling rate should be increased to ensure that it is supersaturated.